Difference: TgcExpertOperation (34 vs. 35)

Revision 352012-11-29 - masato

Line: 1 to 1
 
META TOPICPARENT name="TgcOperationManual"

TGC FE expert guide

Changed:
<
<

TgcOperationExpertManual

>
>

Another experts' instruction here

How to recover from a power cut

 

PS Reset / DCS Reset : ( EXPERT ONLY )

  • Do not perform the following operation if you do not understand what you are doing
Changed:
<
<
  • PS Board Reset
    1. login to SBC for TTC crate
>
>
  • PS Board Reset
    1. login to SBC for TTC crate
 
      • A-Side: sbc-tgc-tcc-eca-01.cern.ch
      • C-Side: sbc-tgc-tcc-ecc-01.cern.ch
Changed:
<
<
    1. source the setup script for TGC Frontend environment
      source /det/muon/TGCFE/installed/bin/TGC_env.sh
    2. run the following command
      TgcTtcvi -c !PsReset 
    3. type yes if you are sure to send the signal.

  • DCS Reset
    1. loguin to SBC and source the setup script (same as PsReset)
    2. run the following command
      TgcTtcvi -c DcsReset 
    3. type yes if you are sure to send the signal.
>
>
    1. source the setup script for TGC Frontend environment
      source /det/muon/TGCFE/installed/bin/TGC_env.sh
    2. run the following command
      TgcTtcvi -c !PsReset 
    3. type yes if you are sure to send the signal.

  • DCS Reset
    1. loguin to SBC and source the setup script (same as PsReset)
    2. run the following command
      TgcTtcvi -c DcsReset 
    3. type yes if you are sure to send the signal.
 

open TGC ROD Status panel

  • You can open TGC Rod status panel alone without TDAQ panel.
Changed:
<
<
    • First, you long in to ATLAS point 1 computer via "atlasgw" from your computer.
       ssh -Y atlasgw 
    • pc-tgc-daq-eca-01 or pc-tgc-daq-ecc-01 is one of good computers to login for this purpose.
    • You source a set-up file and run a command.
       source  /det/muon/TGC/scripts/setupGlobal.sh 
       TGCpanel 
>
>
    • First, you long in to ATLAS point 1 computer via "atlasgw" from your computer.
       ssh -Y atlasgw 
    • pc-tgc-daq-eca-01 or pc-tgc-daq-ecc-01 is one of good computers to login for this purpose.
    • You source a set-up file and run a command.
       source  /det/muon/TGC/scripts/setupGlobal.sh 
       TGCpanel 
 
    • Thne, the panel will appear.

Save All Updated" to save all changes.

>
>
      1. check the all attributes in the list are correct or not.
  1. Please execute "FIle --> Save All Updated" to save all changes.
 
    • PLEASE input some comments to be able to identify the modification.
Changed:
<
<
  1. NEW Dump the TGCFE parametars by useing local xml file as a test.
    dumpTgcFEParameters -f /det/tgc/db/tdaq-04-00-01
>
>
  1. NEW Dump the TGCFE parametars by useing local xml file as a test.
    dumpTgcFEParameters -f /det/tgc/db/tdaq-04-00-01
 
    • If correct parameter dumped, go to next step.
Changed:
<
<
    • ALERT! If NOT correct parametrs dumped, please do follwoing two things. DON'T commit the xml files.
      1. clean up /det/muon/TGCFE/config/FrontEnd/oncall/dump and try to perfome dumpTgcFEParameters.
      2. If you get not correct parameters again, please go back to step 2 and make parameters again.
  1. Please execute "File --> Commit User Repository" to commit all updated xml files to CVS server.
    1. The same comments which you input above will be shown in the window.
    2. Please click commit button to upload files.
  2. If no error message is shown, please post message to the e-log.
  3. For avoiding mis-understanding, Announce Shiftleader and Run Control Shifter, what you changed,why you changed.
>
>
    • ALERT! If NOT correct parametrs dumped, please do follwoing two things. DON'T commit the xml files.
      1. clean up /det/muon/TGCFE/config/FrontEnd/oncall/dump and try to perfome dumpTgcFEParameters.
      2. If you get not correct parameters again, please go back to step 2 and make parameters again.
  1. Please execute "File --> Commit User Repository" to commit all updated xml files to CVS server.
    1. The same comments which you input above will be shown in the window.
    2. Please click commit button to upload files.
  2. If no error message is shown, please post message to the e-log.
  3. For avoiding mis-understanding, Announce Shiftleader and Run Control Shifter, what you changed,why you changed.
 
    • What you changed (/atlas/oks/tdaq-04-00-01/muons/segments/TGC/FE/TGCFE-A(&C)_Segment.data.xml)
    • Why you changed (updating mask parameter)

Chcek eLMB Internal mode at EIFI

Deleted:
<
<
When there is [1] power glitch or [2] LV power-cycle, it can be that wrong eLMB modes are configured into eLMB at EIFI. In such a case, please check internal modes of eLMB, following the instruction.
 
Changed:
<
<
  1. navigate down the FSM tree:
    • TGC -> SIDE -> DCS -> Driver -> DCS EIFI -> ELMB EIFI
>
>
When there is [1] power glitch or [2] LV power-cycle, it can be that wrong eLMB modes are configured into eLMB at EIFI. In such a case, please check internal modes of eLMB, following the instruction.

  1. navigate down the FSM tree:
    • TGC -> SIDE -> DCS -> Driver -> DCS EIFI -> ELMB EIFI
 
    • Note that the FSM node itself is disabled. This is done on purpose and has nothing with this action.
Changed:
<
<
  1. compare values between "Image" and "Current".
>
>
  1. compare values between "Image" and "Current".
 
Changed:
<
<
  1. If there is inconsistency found, please fixed them by left click on the name of eLMB. (the value in leftmost column)
>
>
  1. If there is inconsistency found, please fixed them by left click on the name of eLMB. (the value in leftmost column)
 

Delay Scan

Changed:
<
<
  1. launching DAQ_Panel
    • TDAQ ->DAQPanel
>
>
  1. launching DAQ_Panel
    • TDAQ ->DAQPanel
 
    • ( TDAQ_Configuration )
      • Setup Script: /det/muon/TGCFE/installed/bin/setup_partTGC_DelayScan.sh
      • Part Name: partTGC_DelayScan
Line: 236 to 202
 
    • Click "Read Info" button
Changed:
<
<
  1. executing the script for DelayScan
    • $> cd /det/muon/TGCFE/TGCFeOperation/DelayScan/script
    • $> sh DelayScan.sh
>
>
  1. executing the script for DelayScan
    • $> cd /det/muon/TGCFE/TGCFeOperation/DelayScan/script
    • $> sh DelayScan.sh
 
      • Delayscan will start. It will take about 30 minutes until finish.
Changed:
<
<
  1. transporting raw data to out of P1 machine
>
>
  1. transporting raw data to out of P1 machine
 
    • Raw data of DelayScan are put in "/det/muon/TGCFE/TGCFeOperation/DelayScan/script/rootfile/". you need to copy this files to TGC local machine (pc-tgc-calsrv-01). Please use the GUI for TgcCalibration.("https://pc-atlas-www.cern.ch/twiki/pub/Main/HowToRunTgcCalibration").
Changed:
<
<
  1. data analysis
  • Decoding data and making timing histograms. Doing at pc-tgc-calsrv-01. *setup *sourse /det/muon/TGCFE/installed/bin/TGC_env.sh
>
>
  1. data analysis
  • Decoding data and making timing histograms. Doing at pc-tgc-calsrv-01. *setup *sourse /det/muon/TGCFE/installed/bin/TGC_env.sh
 
    • data decoding
      • do_DecodingDelayscan.sh [runnum]
    • data analysis
Changed:
<
<
      • $> cd /det/muon/TGCFE/TGCFeOperation/DelayScan/script
      • $> sh cable_ASDall.sh [runnum]
>
>
      • $> cd /det/muon/TGCFE/TGCFeOperation/DelayScan/script
      • $> sh cable_ASDall.sh [runnum]
 
    • feed buck timing
      • under construction
Line: 261 to 224
  Use part_TGC2. Setup partition as figures show.
Changed:
<
<
Cosmic_TGC_A.png Cosmic_TGC_C.png
>
>
Cosmic_TGC_A.png Cosmic_TGC_C.png
 

TgcExpertOperationObsoletes

Line: 270 to 232
 
META FILEATTACHMENT attachment="RDAQPanel_DelayScan.png" attr="" comment="" date="1271512688" name="RDAQPanel_DelayScan.png" path="RDAQPanel_DelayScan.png" size="83809" stream="RDAQPanel_DelayScan.png" tmpFilename="/usr/tmp/CGItemp33898" user="ysuzuki" version="1"
META FILEATTACHMENT attachment="Cosmic_TGC_A.png" attr="" comment="" date="1314706360" name="Cosmic_TGC_A.png" path="Cosmic_TGC_A.png" size="25549" stream="Cosmic_TGC_A.png" tmpFilename="/usr/tmp/CGItemp6963" user="satoshi" version="1"
META FILEATTACHMENT attachment="Cosmic_TGC_C.png" attr="" comment="" date="1314706377" name="Cosmic_TGC_C.png" path="Cosmic_TGC_C.png" size="20327" stream="Cosmic_TGC_C.png" tmpFilename="/usr/tmp/CGItemp7044" user="satoshi" version="1"
Added:
>
>
META FILEATTACHMENT attachment="muon_2012_11_28.pdf" attr="" comment="" date="1354209542" name="muon_2012_11_28.pdf" path="muon_2012_11_28.pdf" size="63204" stream="muon_2012_11_28.pdf" tmpFilename="/usr/tmp/CGItemp13463" user="masato" version="1"
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding ATLAS?Please contact the page author (see Topic revision above) or the Run Coordinator of the specific system.
Contact SysAdmins support only for technical issues